Pre-Order

NTS-2.1 Eurorack Conversion Kit

NTS-2.1 Eurorack conversion kit panel — Korg NTS-2 mounted with input, thru, and output jacks

$149.00+ tax/shipping

Read before you buy This is a pre-order, and each kit is hand-assembled by us in small batches, so we can't promise a ship date. We expect 45–60 days from order to ship — if we're able to get yours out sooner, we'll email you, but we don't want to promise a date we can't guarantee. We promise to email you with updates and as soon as it's on the way to you!
Pre-Order Now

The ISOGRID NTS-2.1 Eurorack Conversion Kit brings the Korg Nu:Tekt NTS-2 into a clean 26HP Eurorack format. It puts all four mono inputs, four dedicated THRU connections, and both of the NTS-2's waveform-generator outputs directly on the panel. A buffered 1-to-3 multiple adds three stable copies for routing audio or pitch CV without voltage drop.

A purpose-built PCB handles the internal routing and supplies clean 5V power from your rack. The NTS-2 stays completely stock. No soldering. No loose cables.

Width26HP
Installed Depth35mm (skiff-friendly)
Inputs4× mono
Thrus4× mono
OutputsOUTPUT 1 / 2 (waveform generator)
MultipleBuffered, 1-to-3
Bus Power10/16-pin IDC

Put the Korg NTS-2 in Your Eurorack Case

This kit mounts the Korg Nu:Tekt NTS-2 oscilloscope in your case as a 26HP module, so the scope lives in the rack with the signals it's watching. Patch up to four signals into the INPUT jacks and take each one back out of its own THRU jack to keep your patch moving. OUTPUT 1 / 2 put the NTS-2's waveform generator on the panel as another source.

It's 35mm deep once installed, so it fits skiffs, and it runs from your bus board. No soldering, and the NTS-2 stays stock. Got an NTS-1 mkII as well? See the NTS-1 MK2 Eurorack conversion kit.

NTS-2.1 Kit Features

  • Converts the Korg Nu:Tekt NTS-2 oscilloscope to standard 3U Eurorack format
  • 26HP rack-ready layout
  • Direct bolt-on kit
  • Plug & Play TRS cables - no soldering required
  • Four dedicated mono INPUT jacks
  • Four dedicated mono THRU jacks
  • Access to NTS-2 OUTPUT 1 / 2 for its built-in waveform generator
  • Buffered multiple with 1 input and 3 identical outputs
  • Purpose-built PCB keeps all internal routing clean and secure
  • Standard Eurorack power connection

What's in the Box

  • (1) Korg Nu:Tekt NTS-2 faceplate assembly w/ PCB attached
  • (1) Power activator tab
  • (1) 90-degree USB-C to USB-C cable
  • (6) 90-degree 3.5mm TRS cables
  • (1) 10-16 pin IDC Eurorack power cable
  • (4) M3 x 8mm black Phillips rack mounting screws

Knowledge Base (Pre-Buy FAQs)

PowerRequires Eurorack power via IDC cable. Always power off your rack before connecting. Incorrect cable orientation can damage the kit, the NTS-2, and other modules.
Signal RoutingFour INPUT jacks feed signals into the NTS-2. Four dedicated THRU jacks pass those signals back into the rack. OUTPUT 1 / 2 provide direct access to the NTS-2's built-in waveform generator.
Channel LayoutThe NTS-2's stereo connections are split into dedicated mono jacks for clearer Eurorack patching.
Buffered MultipleThe 1-to-3 buffered multiple creates three identical copies without voltage drop and is suitable for audio or pitch CV.
USB-CThe internal USB-C connection supplies power to the NTS-2. It is power-only and is not a data connection.
CompatibilityDesigned exclusively for the Korg Nu:Tekt NTS-2.
InstallationNo soldering is required. The user installs the included internal cables, power activator tab, USB-C cable, and Eurorack power cable. Installation PDF and video guide available.

Not Included

Korg NTS-2 not included.

Case / additional modules not included.

Gallery

#ENTERTHEGRID